Chennai Testing Laboratory Private Limited

TESTING PARAMETERS:

The quality of edible oil is vital for a healthy, safe and sound life. thus, we require an edible oil testing services.What is this service?These testing services are carried out on tallow, oilseed, and palm oil, cooking oils, mustard oil, groundnut oil, safflower oil, soya oil, sesamum oil, sunflower oil, other vegetable oils and more.Following are the tests that are performed on edible oils: Acid ValueAldehyde ProfilesAliphatic AlcoholsFatty AcidFragrance ProfilesHexane ResiduesHydrocarbon ProfileIodine valueMoisture and volatilesMercury contentPolar compoundsSmoke pointSolid fat contentWhy it is requiredThese quality tests are required for getting complete information about the contents present in the edible oil. For importing or exporting the edible oils, the company has to submit the complete oil analysis report to the regulatory body.

Environmental testing simulates the different climatic conditions and mechanical stress that products are exposed to during their lifetime. Environmental testing will expose weaknesses in a product's design or performance that could occur in service, particularly at extreme levels

PARAMETER:
Noise- Ambient

DESCRIPTION:
Noise monitoring assists identify predominant sources of noise, wherein employees could be exposed to high noise levels, which can result in hearing loss, tinnitus, migraine, and other health concerns. Noise Monitoring therefore enables one to undertake appropriate measures to control noise levels to within lower levels ie noise levels above 75 dB(A) are harmful, although WHO stipulates any Noise Level above 65 dB(A) as noise pollution, whereas any Noise Levels above 30 dB(A) can affect peaceful sleep at Nights. Regular Noise Monitoring will thus enable incorporate appropriate mitigation measures to prevent Noise pollution and its deleterious effect on Human Beings & other living creatures.

PARAMETER:
Noise- Ambient

DESCRIPTION:
Noise monitoring assists identify predominant sources of noise, wherein employees could be exposed to high noise levels, which can result in hearing loss, tinnitus, migraine, and other health concerns. Noise Monitoring therefore enables one to undertake appropriate measures to control noise levels to within lower levels ie noise levels above 75 dB(A) are harmful, although WHO stipulates any Noise Level above 65 dB(A) as noise pollution, whereas any Noise Levels above 30 dB(A) can affect peaceful sleep at Nights. Regular Noise Monitoring will thus enable incorporate appropriate mitigation measures to prevent Noise pollution and its deleterious effect on Human Beings & other living creatures. 

PARAMETER:
Noise- Ambient

DESCRIPTION:
Noise monitoring assists identify predominant sources of noise, wherein employees could be exposed to high noise levels, which can result in hearing loss, tinnitus, migraine, and other health concerns. Noise Monitoring therefore enables one to undertake appropriate measures to control noise levels to within lower levels ie noise levels above 75 dB(A) are harmful, although WHO stipulates any Noise Level above 65 dB(A) as noise pollution, whereas any Noise Levels above 30 dB(A) can affect peaceful sleep at Nights. Regular Noise Monitoring will thus enable incorporate appropriate mitigation measures to prevent Noise pollution and its deleterious effect on Human Beings & other living creatures.

Hand Swab- Knife SwabCutting board swabUniform swabApron swabHand swabEquipment SwabWorking table swabSurface Swab

Parameters:
<sup>Acid Mist (H2SO4), Ammonia, Carbon dioxide, Carbon monoxide, Flow Rate, Heavy metals as Pb, Hydrogen Sulphide (H2S), Mercury, Oxides of Nitrogen, Oxygen, Particulate matter, Sulphur dioxide, Temperature, Velocity, Volatile OrganicCompounds.

Description :
Process emission from manufacturing industries are set to meet regulatory emission standards to comply as well as to mitigate any impact on the public health. Regular & Continuous monitoring of stack & process emission shall therefore ensure regulatory emission standards are met, the level of pollution do not affect public health, maintain air pollution levels at innocuous levels, and assist Industry develop better control measures. Stack & Process emission monitoring will therefore involve analysis for constituents in dust, odour, mist, smoke etc., and major pollutants monitored are VOC,  CO, NOX,SO2, PM2.5, PM10, HF, HCL, Hg etc, thus determine the quality, quantity & type of pollutant emitted, efficiency of air pollution control equipment & establish an appropriate design of air pollution control equipment.</sup> 

Environmental consultants provide analysis and insight on environmental concerns for public and private industries; property acquisition, development and construction; public works and infrastructure; health compliance and safety regulations; sustainability and energy efficiency; and so much moreIndoor Air Quality PARAMETERSMETHODRESPIRABLE PARTICULATE MATTERNIOSH 0600SULPHUR DIOXIDE (SO2)IS 5182 Part 2 - 2001OXIDES OF NITROGEN (NO2)IS 5182 Part 6 - 2006CARBON MONOXIDE (CO)NIOSH 6604OXYGEN (O2)NIOSH 6601CARBON DIOXIDE (CO2)CTL/SOP/AIR/21 – 2016Ambient Air Quality PARAMETERSMETHODSPARTICULATE MATTER (PM2.5)IS 5182 Part 24 - 2019PARTICULATE MATTER (PM10)IS 5182 Part 23 - 2006 SULPHUR DIOXIDE (SO2)IS 5182 Part 2 - 2001 OXIDES OF NITROGEN (NO2)IS 5182 Part 6 - 2006 OZONE (O3)CTL/SOP/AIR/08 - 2016LEAD (Pb)IS 5182 PART 22 - 2004 CARBON MONOXIDE (CO)CTL/SOP/AIR/23 – 2016AMMONIA (NH3)IS 5182 Part 25 - 2018 ARSENIC (As)CTL/SOP/AIR/06 – 2016NICKEL (Ni)IS 5182 Part 26 - 2020BENZENE (C6H6)IS 5182 PART 11 - 2006 BENZO(a)PYRENEIS 5182 PART 12 - 2004 DG Stack Emission  PARAMETERSMETHODOXIDES OF NITROGEN Nox (as NO2)IS 11255 PART 7 2005 SULPHUR DIOXIDE (SO2)IS 11255 PART 2 1985 PARTICULATE MATTER(PM)IS 11255 PART 1 1985 CARBON MONOXIDE (CO)CTL/SOP/STACK/10                                               (Flue Gas Analyser)CARBON DIOXIDE (CO2)OXYGEN (O2)

Sewage Treatment Plants (STPs):Parameters:pHBio-chemical Oxygen Demand (BOD)Total Suspended Solids (TSS)Chemical Oxygen Demand (COD)Nitrogen-TotalPhosphorus-TotalFecal Coliform

Include visual inspections; air monitoring and sampling surveys of suspected air contaminants; HVAC system evaluation; sick building syndrome diagnosis; building occupant symptoms questionnaire; remediation design and oversight; operations and maintenance programs.

Environmental testing for water, soil, air, sludge, petroleum, chemicals, and other samples. Environmental chemists operate state-of-the-art analytical instrumentation, testing to government, regulatory, and industry standards.

Parameter :
<sup>Heat Stress, Humidity, Temperature,Suspended Particulate matter (SPM), Carbon dioxide, Carbon monoxide, Chromium as Cr, Hydrogen Sulphide, Arsenic as As, Lead as Pb, Oxides of Nitrogen, Oxygen, Ozone, Particulate Matter 2.5, Respirable Particulate matter, Sulphur dioxide, Coagulase positive Staphylococcus aureus, Coliform count, Escherichia coli, Listeria monocytogenes, Salmonella sp, Total Bacterial count / Total Plate count, Yeast and mold Count, Benzene, Benzene, Toluene & Xylene, Formaldehyde, Dibromochloromethane, Dichlorodifluoromethane, 1,1 – dichloroethane, 1,1 – dichloroethylene, 1,1 – dichlororopropylene, 1,1,1 – trichloroethane, 1,1,1,2 tetrachloroethane, 1,1,2 – trichloroethane, 1,1,2,2 tetrachloroethane, 1,2 – dibromoethane, 1,2 – dichloroethane, 1,2 – dichloropropane, 1,2 dibromo - 3 chloropropane, 1,2 dichlorobenzene, 1,2,3 – trichloropropane, 1,2,4 – trichlorobenzene, 1,2,4 – trimethylbenzene,  1,3 – dichlorobenzene, 1,3 – dichloropropane, 1,3,5 – trimethylbenzene, 1,4 – dichlorobenzene, 1.2.3 trichlorobenzene, 2 – chlorotoluene, 2,2 – dichloropropane, 2,2 – dichloropropane, 4 – isopropyltoluene, Air Movement, Ammonia, Boromoform, Bromobenzene, Bromochloromethane, Bromodichloromethane, Bromomethane, , Carbon tetrachloride, Chlorine, Chlorobenzene, Chloroethane, Chloroform, Chloromethane, , Cis 1,2 – dichloroethylene, Cis 1,3 dichloropropylene, Dibromomethane, Ethylbenzene, Fluorides, Hexachlorobutadiene, , lsopropylbenzene, M – xylene, Methylene chloride, N – butylbenzene, N – propylbenzene, Naphthalene, Nickel as Ni, P – xylene ,O – xylene, , Sec – butylbenzene, Styrene, , Tert – butylbenzene, Tetrachloroethylene, Toluene, , Trans 1,2 dichloroethylene, Trans 1,3 dichloropropylene, Trichloroethylene, Trichlorofluroromethane, Total Volatile Organic Compound (TVOC)

Description:
We tend to think that air pollution faced outside as risk, but air we breathe inside could be polluted. Indoor & work atmosphere air quality had long been neglected. However, monitoring of indoor air quality is important, because it can help prevent or reduce health risk associated with poor air quality. Poor indoor/work atmosphere air quality is known to cause a range of health issues such as head-ache, fatigue, eye-irritation, respiratory illness, or a lethal Carbon-Mono-Oxide could be life threatening. It could affect productivity of workers, or a poor ventilation can create a sick syndrome building resulting in fatigue, discomfort etc. Beyond this Indoor Air Quality is also governed by strict regulations such as OHSAS Standards, Factories Act, ASHRAE, IGBC Guidelines. Therefore, indoor air quality monitoring does divulge the quality & safety of Indoor/Work Atmosphere air quality.</sup>

Parameters:
<sup>Acid Mist (H2SO4), Ammonia, Carbon dioxide, Carbon monoxide, Flow Rate, Heavy metals as Pb, Hydrogen Sulphide (H2S), Mercury, Oxides of Nitrogen, Oxygen, Particulate matter, Sulphur dioxide, Temperature, Velocity, Volatile OrganicCompounds.

Description :
Process emission from manufacturing industries are set to meet regulatory emission standards to comply as well as to mitigate any impact on the public health. Regular & Continuous monitoring of stack & process emission shall therefore ensure regulatory emission standards are met, the level of pollution do not affect public health, maintain air pollution levels at innocuous levels, and assist Industry develop better control measures. Stack & Process emission monitoring will therefore involve analysis for constituents in dust, odour, mist, smoke etc., and major pollutants monitored are VOC,  CO, NOX,SO2, PM2.5, PM10, HF, HCL, Hg etc, thus determine the quality, quantity & type of pollutant emitted, efficiency of air pollution control equipment & establish an appropriate design of air pollution control equipment.</sup> 

PARAMETERS:
Heat Stress, Humidity, Temperature,Suspended Particulate matter (SPM), Carbon dioxide, Carbon monoxide, Chromium as Cr, Hydrogen Sulphide, Arsenic as As, Lead as Pb, Oxides of Nitrogen, Oxygen, Ozone, Particulate Matter 2.5, Respirable Particulate matter, Sulphur dioxide, Coagulase positive Staphylococcus aureus, Coliform count, Escherichia coli, Listeria monocytogenes, Salmonella sp, Total Bacterial count / Total Plate count, Yeast and mold Count, Benzene, Benzene, Toluene & Xylene, Formaldehyde, Dibromochloromethane, Dichlorodifluoromethane, 1,1 – dichloroethane, 1,1 – dichloroethylene, 1,1 – dichlororopropylene, 1,1,1 – trichloroethane, 1,1,1,2 tetrachloroethane, 1,1,2 – trichloroethane, 1,1,2,2 tetrachloroethane, 1,2 – dibromoethane, 1,2 – dichloroethane, 1,2 – dichloropropane, 1,2 dibromo - 3 chloropropane, 1,2 dichlorobenzene, 1,2,3 – trichloropropane, 1,2,4 – trichlorobenzene, 1,2,4 – trimethylbenzene,  1,3 – dichlorobenzene, 1,3 – dichloropropane, 1,3,5 – trimethylbenzene, 1,4 – dichlorobenzene, 1.2.3 trichlorobenzene, 2 – chlorotoluene, 2,2 – dichloropropane, 2,2 – dichloropropane, 4 – isopropyltoluene, Air Movement, Ammonia, Boromoform, Bromobenzene, Bromochloromethane, Bromodichloromethane, Bromomethane, , Carbon tetrachloride, Chlorine, Chlorobenzene, Chloroethane, Chloroform, Chloromethane, , Cis 1,2 – dichloroethylene, Cis 1,3 dichloropropylene, Dibromomethane, Ethylbenzene, Fluorides, Hexachlorobutadiene, , lsopropylbenzene, M – xylene, Methylene chloride, N – butylbenzene, N – propylbenzene, Naphthalene, Nickel as Ni, P – xylene ,O – xylene, , Sec – butylbenzene, Styrene, , Tert – butylbenzene, Tetrachloroethylene, Toluene, , Trans 1,2 dichloroethylene, Trans 1,3 dichloropropylene, Trichloroethylene, Trichlorofluroromethane, Total Volatile Organic Compound (TVOC)

DESCRIPTIONS:
We tend to think that air pollution faced outside as risk, but air we breathe inside could be polluted. Indoor & work atmosphere air quality had long been neglected. However, monitoring of indoor air quality is important, because it can help prevent or reduce health risk associated poor air quality. Poor indoor/work atmosphere air quality is known to cause a range of health issues such as head-ache, fatigue, eye-irritation, respiratory illness or a lethal Carbon-Mono-Oxide could be life threatening. It could affect productivity of workers, or a poor ventilation can create a sick syndrome building resulting in fatigue, discomfort etc. Beyond this Indoor Air Quality is also governed by strict regulations such as OHSAS Standards, Factories Act, ASHRAE, IGBC Guidelines. Therefore, indoor air quality monitoring does divulge the quality & safety of Indoor/Work Atmosphere air quality

PARAMETER:
Barometric pressure, Humidity, Rainfall, Solar radiation, Temperature, Wind Direction, Wind Speed,

DESCRIPTION: 
Micrometeorology is a vital factor in Air Dispersion Modelling, a mathematical process that simulates how the pollutants move through in the atmosphere and hence requires multiple years of hourly meteorological data such as wind speed, wind direction, temperature etc. Apart from its importance in air pollution abatement, micrometeorological monitoring also plays a significant role in Agriculture by aiding the farmers in taking informed decision like screening for heat tolerance, optimise water use, pest control etc.

Parameters:
<sup>Acid Mist (H2SO4), Ammonia, Carbon dioxide, Carbon monoxide, Flow Rate, Heavy metals as Pb, Hydrogen Sulphide (H2S), Mercury, Oxides of Nitrogen, Oxygen, Particulate matter, Sulphur dioxide, Temperature, Velocity, Volatile OrganicCompounds.

Description :
Process emission from manufacturing industries are set to meet regulatory emission standards to comply as well as to mitigate any impact on the public health. Regular & Continuous monitoring of stack & process emission shall therefore ensure regulatory emission standards are met, the level of pollution do not affect public health, maintain air pollution levels at innocuous levels, and assist Industry develop better control measures. Stack & Process emission monitoring will therefore involve analysis for constituents in dust, odour, mist, smoke etc., and major pollutants monitored are VOC,  CO, NOX,SO2, PM2.5, PM10, HF, HCL, Hg etc, thus determine the quality, quantity & type of pollutant emitted, efficiency of air pollution control equipment & establish an appropriate design of air pollution control equipment.</sup> 

PARAMETER:
Barometric pressure, Humidity, Rainfall, Solar radiation, Temperature, Wind Direction, Wind Speed,

DESCRIPTION: 
Micrometeorology is a vital factor in Air Dispersion Modelling, a mathematical process that simulates how the pollutants move through in the atmosphere and hence requires multiple years of hourly meteorological data such as wind speed, wind direction, temperature etc. Apart from its importance in air pollution abatement, micrometeorological monitoring also plays a significant role in Agriculture by aiding the farmers in taking informed decision like screening for heat tolerance, optimise water use, pest control etc.